Offset quadrant shower trays give you the curved, space-saving front of a quadrant tray with extra width for a more comfortable showering area. The longer side makes them ideal for en-suites and bathrooms where a standard quadrant feels too small but a rectangular tray would project too sharply into the room. Left and right hand options help match the tray to your corner layout, door opening and pipework.

Filter

TAILS’ ASYMMETRIC CORNER FIT

Gain extra length within a curved corner

Offset quadrant trays combine unequal wall-side dimensions with a curved room-facing edge, creating a longer showering footprint than a standard equal-sided quadrant. They suit corners where one wall offers more space than the other, helping you buy a roomier tray without introducing the projecting outer corner of a rectangular design.

Is an Offset Quadrant Shower Tray Right for Your Corner?

Compare unequal wall lengths, curved frontage and the required orientation

An Asymmetrical Quadrant Shower Tray Suits You If

One wall run is longer

The unequal tray dimensions can follow a corner where one adjoining wall provides more usable length. This allows the shower footprint to extend in one direction without requiring the same measurement along both sides.

You want extra internal length

Compared with a standard quadrant of similar depth, the longer side can provide more room for forward and backward movement. Check the complete internal area, as enclosure framing and the curved front influence the usable standing space.

A softened outer corner helps

The curved frontage removes the sharp room-facing corner found on a rectangular tray. This can preserve a more comfortable route past the shower where a toilet, basin or doorway sits near the outer edge.

Another Shower Tray Shape May Suit You Better If

Both wall lengths are equal

A standard quadrant tray may create a more balanced fit where the available corner has matching dimensions in both directions. The offset format adds length to one side that may be unnecessary in a square corner layout.

You need straight enclosure edges

A rectangular tray may suit better when the planned enclosure uses straight panels throughout or when the room can comfortably accept a square outer corner. Offset quadrant trays require glass designed to follow their curved frontage.

The correct handing is unavailable

Some offset quadrant trays are supplied in left-hand and right-hand versions. Do not rotate or substitute the wrong orientation where the longer side, curved edge or waste position would conflict with the intended enclosure and room layout.

Offset Quadrant Tray FAQs

Handing, size descriptions and enclosure compatibility explained

  • How is the handing of an offset quadrant tray identified?

    Handing conventions can vary between manufacturers. Use the individual plan-view drawing to confirm which side carries the longer dimension when the tray is viewed from the intended room position, rather than relying on the product name alone.

  • What do the two tray measurements mean?

    They describe the unequal dimensions running along the adjoining walls. Check the order used in the product specification, because two offset trays with the same measurements may still have different orientation, corner radius or waste locations.

  • Will any offset quadrant enclosure fit the tray?

    No. The enclosure must match the tray’s complete size, handing, curve profile and corner radius. Select an approved compatible combination rather than pairing products solely because their headline dimensions appear to be the same.

DESIGNER’S NOTE

Run the tray’s longer side along the room’s strongest wall and keep nearby furniture clear of the curved frontage, allowing the asymmetric shape to feel deliberate and balanced.