700mm end bath panels are made to finish the short side of standard-width straight baths where the bath end remains visible. This size is commonly used with 700mm wide baths, helping cover the frame, pipework and underside at the exposed end. It gives the bath a more complete fitted look, especially when matched with the correct front panel.

Filter

TAILS’ SIZE CHECK

Finish a 700mm bath end neatly

A 700mm end bath panel covers the exposed short side of a compatible bath, concealing the frame, legs and plumbing beneath the rim. It is commonly selected alongside a matching front panel, but the precise width, height, profile and joining arrangement must suit the individual bath installation.

Buying 700mm End Bath Panels for an Exposed Bath Side

Check nominal width, finished height and front-panel compatibility

A 700mm Bath End Panel Suits You If

The short bath end is exposed

A 700mm wide end bath panel is intended to finish a visible short side rather than the longer front face. It is useful where the bath sits in a corner and one end remains open to the room.

Your bath has a compatible width

This panel size is designed for baths with a corresponding nominal end width, subject to the individual product pairing. Confirm the exact finished measurement and rim profile rather than assuming every bath described as 700mm wide will fit.

You are matching the front panel

Buying the end panel from the same range as the front panel helps the two sections meet more cleanly at the corner. It also improves consistency in colour, surface texture, thickness and edge detail across the completed surround.

Another End Panel May Suit You Better If

Your bath end measures differently

A narrower or wider bath requires an end panel made for that dimension. Do not select by the nearest nominal size, as an incorrect width can leave gaps, prevent secure fixing or create a poor junction with the front panel.

The bath has a shaped profile

A standard 700mm end panel may not follow the rim, return or outer contour of a corner bath, shower bath or other shaped design. Use a panel specifically stated as compatible with the selected bath model.

The installed height falls outside range

Bath legs, flooring and rim depth determine the finished panel height. Check any permitted adjustment or trimming allowance before purchase, because a nominally correct width will not compensate for a panel that is too short or too tall.

700mm End Bath Panel FAQs

Nominal sizing, panel pairing and bath compatibility explained

  • Is a 700mm end panel exactly 700mm wide?

    Not always. The stated size may be nominal, while the precise panel width can reflect the bath rim, front-panel junction or installation system. Use the manufacturer’s dimensions before setting the bath position or surrounding finishes.

  • Will it fit any 700mm-wide bath?

    No. The panel must suit the bath’s exact width, height, rim shape and fixing arrangement. Where possible, select the 700mm bath end panel specifically listed for the bath or matching panel collection.

  • Do I also need a front panel?

    Yes, when the long side of the bath is also exposed. A 700mm end panel covers only the short side, so a compatible front panel is normally required to complete a two-sided corner installation.

DESIGNER’S NOTE

Keep the 700mm end panel flush with the front panel junction and bath rim so the shorter exposed side reads as part of one continuous surround.