Compact shower spaces need an entrance that works without wasting wall or floor space. 700mm wide pivot shower doors are suited to narrower alcoves, cloakroom showers and tight en-suites where the opening still needs to feel usable. The pivoting action gives straightforward access while keeping the shower area neatly enclosed. These 700mm shower pivot doors are ideal when every measurement matters in a smaller bathroom layout.

Filter

TAILS’ OPENING CHECK

Fit straightforward access into a narrow opening

A 700mm pivot shower door brings a simple hinged-style opening action to a relatively narrow recess or compatible enclosure layout. It can provide more direct access than an overlapping sliding design of similar width, provided the pivot arc, finished opening and nearby bathroom fittings leave enough operating clearance.

Is a 700mm Pivot Shower Door Right for Your Opening?

Check finished width, pivot movement and usable entrance space

A 700mm Wide Pivot Shower Door Suits You If

Your finished opening is compact

This nominal width can suit a narrow recess where a broader entrance product will not fit. Measure between completed wall surfaces at several heights and compare the smallest result with the individual door’s stated adjustment range.

You prefer a direct opening action

A 700mm pivot enclosure door rotates around an offset pivot rather than folding or sliding across another panel. This can create a straightforward entrance, although the clear access width depends on the frame and exact pivot position.

The swing area remains unobstructed

Buying this configuration makes sense when the moving panel can operate without striking a basin, toilet, radiator or doorway. Mark the expected arc on the floor before ordering, using the manufacturer’s opening diagram where available.

Another Width or Opening Configuration May Suit You Better If

Nearby fittings block the pivot arc

A sliding or folding configuration may preserve better circulation where sanitaryware or furniture sits close to the entrance. Pivot movement varies by design, so do not assume the complete panel remains inside the showering area when opened.

The access feels too restricted

The usable entrance will be narrower than the full 700mm headline width because profiles and part of the panel occupy the opening. A broader model may be more comfortable where the wall span and surrounding layout allow it.

Your recess falls outside adjustment

A nominally similar opening does not guarantee a correct fit. Select another size if the finished measurement sits beyond the permitted range, rather than relying on excessive packing, unusually thick trims or incomplete engagement with the wall profiles.

700mm Pivot Shower Door FAQs

Opening measurements, swing direction and clear access explained

  • Will a 700mm door fit a 700mm recess?

    Only when the finished opening falls within the selected model’s adjustment range. Measure after tiles or wall panels are installed, checking the top, middle and bottom because an uneven recess may be narrower in one position.

  • Does the panel open fully into the bathroom?

    Not always. The offset pivot may cause part of the panel to move inward while the remainder moves outward, depending on the design. Use the individual opening diagram to confirm the arc and required clearance on both sides.

  • How wide is the actual entrance?

    It will be less than the nominal 700mm overall size because the frame, pivot position and open panel reduce the clear gap. Check the manufacturer’s stated access dimension if comfortable entry is a key purchasing consideration.

DESIGNER’S NOTE

Keep the floor area beside the pivot edge visually and physically clear, allowing the narrow entrance to feel deliberate rather than crowded by nearby furniture or sanitaryware.