1700mm front bath panels are made for one of the most common straight bath lengths in UK bathrooms. Fitted along the long exposed side, they help turn a basic bath installation into a cleaner, furniture-style finish while hiding the frame, waste fittings and pipework underneath. This size works well in family bathrooms, shower bath layouts and standard wall-to-wall bath positions.

Filter

TAILS’ PANEL LENGTH CHECK

Finish the bath’s full length cleanly

A 1700mm front bath panel covers the long exposed face of a compatible 1700mm bath, concealing the space beneath and completing its fitted appearance. It suits new installations and replacement projects, but the nominal length alone does not guarantee a match with every bath shape, height or fixing arrangement.

Is a 1700mm Front Bath Panel Right for Your Bath?

Confirm the exposed side, bath profile and precise finished dimensions

A 1700mm Long Bath Panel Suits You If

The long bath side is exposed

This panel is intended for the principal 1700mm side of a fitted bath rather than its shorter end. It creates a finished face beneath the rim where the bath is not enclosed by a wall or purpose-built surround.

You are replacing a matching panel

A replacement 1700mm bath panel can refresh a damaged or dated installation without changing the bath itself. Record the existing panel’s length, height and upper profile so the new version covers the same opening neatly.

The complete bath system is compatible

Buying a front panel specified for the selected bath makes the rim connection, finished height and fixing arrangement easier to confirm. Use the bath manufacturer’s stated dimensions rather than pairing products solely because both carry a 1700mm description.

Another Panel Size or Profile May Suit You Better If

The finished opening is shorter

Do not assume every 1700mm front panel can be reduced to fit a smaller space. Select another size where the precise opening differs, unless the individual product instructions specifically permit trimming to the required finished length.

The short bath end is visible

A front panel covers only the bath’s long side. A separate compatible end panel may also be needed where one short end remains exposed, and its height, profile and finish should correspond with the selected front panel.

The bath has a shaped side

Curved, bowed or specially profiled baths may require a dedicated panel designed around their exact outer face. A standard straight 1700mm bath panel will not follow a shaped bath correctly simply because the overall length is similar.

1700mm Front Bath Panel FAQs

Nominal length, exposed ends and future access explained

  • Is a 1700mm panel exactly 1700mm long?

    The measurement may be nominal, and the exact finished size can vary between products. Check the technical drawing for the panel’s precise length and height, particularly when it must fit tightly between walls or adjoining finishes.

  • Does the front panel cover the bath end?

    No. It is designed for the long front face of the bath. Where a short end is also exposed, add the appropriate compatible end panel unless the individual bath surround uses a different finishing arrangement.

  • Can the panel provide plumbing access?

    That depends on the panel and fixing method. Some installations allow the panel to be removed, while others may require a separate access provision. Confirm how the waste and tap connections will be reached before completing surrounding finishes.

DESIGNER’S NOTE

Match the panel closely to the bath’s colour and surface, keeping the long 1700mm face visually simple so it reads as one clean horizontal element.