800mm quadrant shower trays are a strong fit for compact corner showers where a straight-edged enclosure may feel too bulky. The curved front keeps the footprint softer and helps improve movement around nearby basins, toilets or towel rails. This size is well suited to en-suites, cloakrooms and smaller bathrooms that still need a proper enclosed shower. Pair an 800mm curved shower tray with a matching quadrant enclosure for a neat, space-conscious layout that looks more finished than a basic corner setup.

Filter

TAILS’ EQUAL-SIDE CHECK

Use a compact corner without harsh projection

An 800mm quadrant shower tray uses equal wall-facing sides and a curved frontage to create a compact corner showering footprint. It suits smaller bathrooms where a square outer corner would intrude into the circulation route, while still providing a balanced base for a correctly matched curved enclosure.

Is an 800mm Quadrant Shower Tray Right for Your Corner?

Compare equal wall lengths, curved clearance and internal standing space

An 800 x 800mm Quadrant Tray Suits You If

Both corner walls offer similar space

The equal-sided footprint works naturally where approximately the same wall length is available in each direction. It avoids forcing a longer return onto one wall, making the layout easier to balance beside compact furniture or sanitaryware.

The curved front improves circulation

Removing the exposed square corner can create a smoother route past the enclosure, particularly where a doorway, basin or toilet sits nearby. Mark the complete curved outline on the floor to judge the practical clearance before buying.

You want a contained corner installation

A compact 800mm quadrant shower base keeps the showering area within a defined corner rather than extending along one wall. This can suit en suites and smaller bathrooms where preserving usable central floor space is a priority.

Another Corner Footprint May Suit You Better If

You need more standing length

An offset configuration may provide a longer internal area while retaining a curved frontage. This can be more comfortable where one wall has additional space available and the equal 800mm sides would feel restrictive during everyday showering.

The enclosure curve does not match

Products sharing an 800mm description can still use different front radii and profile positions. Select a tray and enclosure confirmed as compatible, because a mismatched curve may prevent correct alignment, support and sealing around the lower edge.

Your corner is not truly square

Substantial wall angles, boxed services or uneven finished surfaces can stop both straight edges from sitting correctly. Another footprint or preparatory building work may be required where the available corner cannot accept the tray’s equal right-angled sides.

800mm Quadrant Shower Tray FAQs

Wall coverage, curved-enclosure matching and waste placement clarified

  • Do both straight sides measure 800mm?

    They are normally described as equal 800mm wall-facing sides, but the precise finished measurements may differ slightly from the nominal size. Check the overhead drawing before preparing walls, pipework or surrounding floor finishes.

  • How do I match the correct curved enclosure?

    Use an enclosure confirmed for the tray’s exact dimensions and front radius. Do not match by the 800mm label alone, as differences in curvature, adjustment range and profile position can prevent the glass and tray from meeting correctly.

  • Where should the waste connection be planned?

    Base the pipe route on the waste position shown in the individual tray drawing. Check below-floor obstacles and required access before installation, as moving from another tray shape may place the outlet in a different part of the corner.

DESIGNER’S NOTE

Keep both wall runs visually balanced and leave the curved front unobstructed, allowing the compact 800mm footprint to soften movement through the room rather than appear squeezed into the corner.