Rounded chrome levers create a balanced, efficient bath-filling arrangement.
180mm tap centres: Suit baths prepared for the confirmed two-hole layout.
Fast minimum-pressure flow: Delivers 13.4 litres per minute at 0.5 bar.
Quarter-turn cartridges: Provide short, direct hot and cold control.
111mm fixed spout: Flexible tails and bath waste are purchased separately.
Original price was: £155.00.
Our Price: £74.49Current price is: £74.49.Save £80.51 off RRP
| Product Type | Bath filler tap |
|---|---|
| Brand | Scudo |
| Collection | Premier |
| Mixer Type | Manual |
| Installation Type | Deck mounted |
| Tap Holes Required | 2 |
| Tap Hole Diameter | 32mm |
| Tap Centres | 180mm |
| Overall Height | 108.5mm |
| Tap Body Height | 80.5mm |
| Base Diameter | 46mm |
| Tap Body Diameter | 38mm |
| Base-to-Spout Height | 41.5mm |
| Spout Reach | 111mm |
| Maximum Projection | 126mm |
| Below-Deck Tail Length | 53mm |
| Number of Handles | 2 |
| Handle Type | Lever |
| Valve Type | Quarter-turn cartridge |
| Spout Movement | Fixed |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 7.3 l/min |
| Flow Rate at 0.5 Bar | 13.4 l/min |
| Flow Rate at 1 Bar | 19.8 l/min |
| Flow Rate at 2 Bar | 28.2 l/min |
| Flow Rate at 3 Bar | 34.7 l/min |
| Inlet Connection | 3/4 BSP |
| WRAS Approved | No |
| TMV Approved | No |
| Construction Material | Stainless steel |
| Finish | Polished chrome |
| Flexible Tails Included | No |
| Waste Included | No |
The Scudo Premier Polished Chrome 2 Handles Bath Filler Tap gives the bath a clean, balanced centrepiece without overcomplicating the design. Two round deck pillars, slim lever handles and a straight central spout create a well-proportioned look that works naturally with modern chrome showers and accessories. Separate hot and cold controls make it easy to fine-tune the mix, while quarter-turn cartridges keep everyday operation simple. With a strong flow of 13.4 litres per minute at its 0.5-bar minimum operating pressure, the Premier is built to fill the bath efficiently while bringing a polished, coordinated finish to the deck.
Check the available deck space, 180mm tap centres and working pressure before the bath is drilled or installed.
The two handles sit either side of the central spout, creating a symmetrical arrangement with separate control over the hot and cold supplies.
The confirmed delivery rises from 13.4 l/min at 0.5 bar to 34.7 l/min at 3 bar, depending on the available system pressure.
Cylindrical tap bodies and restrained lever handles coordinate neatly with round chrome shower fittings and bathroom accessories.
The deck must accept two 32mm tap holes at 180mm centres, together with enough room beneath for the connections.
This Premier filler is not confirmed as WRAS or TMV approved and should not be selected where either approval is required.
Flexible tails and a bath waste are not included, so both the connections and waste arrangement must be planned separately.
Each lever controls one water supply, allowing the hot and cold flow to be blended manually through the central spout. The quarter-turn cartridges mean the handles do not need to be rotated through several full turns. As this is a manual mixer rather than a thermostatic tap, check the mixed water temperature before entering the bath.
The tap requires two 32mm holes positioned at 180mm centres. Its fixed spout reaches 111mm from the tap body and the complete arrangement projects by up to 126mm. Check that the outlet will sit comfortably over the bath bowl and that the deck has enough clear space above and below for both pillars and their 3/4 BSP connections.
The confirmed operating range begins at 0.5 bar and extends to 5 bar. Flow is rated at 13.4 l/min at 0.5 bar, 19.8 l/min at 1 bar and 34.7 l/min at 3 bar. A separate 7.3 l/min test figure is listed at 0.2 bar, but this is below the stated minimum operating pressure and does not confirm suitability at 0.2 bar.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
