Deep black colour makes the bath-filling flow part of the design.
Waterfall-style outlet: The broad open spout creates a visible bath flow.
Twin quarter-turn levers: Adjust hot and cold supplies independently.
High filling performance: Delivers 23.4 litres per minute at 0.5 bar.
WRAS-approved fitting: Requires two 32mm bath tap holes.
Original price was: £229.00.
Our Price: £105.99Current price is: £105.99.Save £123.01 off RRP
| Product Type | Bath filler tap |
|---|---|
| Brand | Scudo |
| Collection | Belini |
| Finish | Matt black |
| Tap Type | Manual mixer |
| Number of Handles | 2 |
| Handle Type | Lever |
| Tap Holes Required | 2 |
| Tap Hole Diameter | 32mm |
| Cartridge Type | Quarter turn |
| Cartridge Spare Code | T8308–08 |
| Swivel Spout | No |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 13.4 litres per minute |
| Flow Rate at 0.5 Bar | 23.4 litres per minute |
| Flow Rate at 1 Bar | 32 litres per minute |
| Flow Rate at 2 Bar | 40.95 litres per minute |
| Flow Rate at 3 Bar | 50 litres per minute |
| Inlet Connection | 3/4-inch BSP |
| WRAS Approved | Yes |
| TMV Approved | No |
| Flexible Tails Included | No |
| Waste Included | No |
The Scudo Belini Matt Black Two Handles Bath Filler Tap is made for bathrooms where ordinary chrome brassware would feel like a missed opportunity. Its broad, open spout creates a distinctive waterfall-style flow, while the two curved lever handles give hot and cold water their own easy-to-reach controls. The matt black finish looks especially effective against white baths, pale stone effects and matching black accessories, creating a properly coordinated scheme rather than a collection of unrelated fittings. Performance is another strong reason to buy: flow reaches 23.4 litres per minute at the minimum 0.5-bar operating pressure and rises to 50 litres at 3 bar, helping the bath fill without the tap becoming a visual compromise.
Confirm the two-hole bath deck, operating pressure and separately required fittings before choosing it as the centrepiece of the bathing area.
The dark finish can coordinate with black mirrors, overflow covers, flush plates and other matching bathroom details.
The broad open spout turns the running water into a visible feature rather than hiding it beneath a conventional narrow outlet.
Published flow rates range from 23.4 litres per minute at 0.5 bar to 50 litres per minute at 3 bar.
The Belini needs two 32mm mounting holes and should not be ordered for a bath prepared only for a single-hole mixer.
This is a manual mixer and is not TMV approved, so it does not provide confirmed thermostatic regulation.
Flexible tails and a bath waste are not supplied and must be selected separately where required.
Flow is rated at 23.4 litres per minute at 0.5 bar, 32 litres at 1 bar, 40.95 litres at 2 bar and 50 litres at 3 bar. A separate 13.4-litre figure is listed at 0.2 bar, but the confirmed minimum operating pressure is 0.5 bar, so installation planning should use 0.5 bar as the lower limit. Actual filling time will also depend on bath capacity and the available hot and cold supplies.
The Belini requires two tap holes, each with a stated diameter of 32mm. The bath deck must provide suitable space and support for both controls and the central fixed spout. Its inlet connection is 3/4-inch BSP, and flexible tails are not included. Check access beneath the tap position before drilling or fitting, as the connections will need to remain reachable during installation and future servicing.
Use a soft cloth with mild soapy water, then rinse and dry the surface to reduce water marks. Avoid abrasive pads, scouring powders and acidic or aggressive bathroom cleaners, as these may alter the matt appearance. Wiping the tap after bathing is particularly worthwhile around the broad spout, lever bases and mounting points. The tap is WRAS approved, but it is not TMV approved.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
