Soft curves keep this compact black basin mixer from feeling overly severe.
Compact 128mm height: Suits carefully matched smaller basin layouts.
Useful 82mm reach: Positions the fixed spout neatly over the bowl.
Low-pressure compatible: Operates from 0.2 bar on suitable systems.
WRAS-approved package: Includes flexible tails and a matching basin waste.
Original price was: £120.00.
Our Price: £55.99Current price is: £55.99.Save £64.01 off RRP
| Product Type | Basin mixer tap |
|---|---|
| Brand | Scudo |
| Collection | Belini |
| Tap Type | Mono mixer |
| Construction Material | Brass |
| Colour / Finish | Matt black |
| Handle Type | Lever |
| Swivel Spout | No |
| Overall Height | 128mm |
| Body Height | 95mm |
| Base-to-Spout Height | 69.5mm |
| Spout Reach | 82mm |
| Tap Body Size | 45 x 45mm |
| Base Plate Size | 54 x 54mm |
| Base Plate Thickness | 6mm |
| Tap Holes Required | 1 |
| Tap Hole Diameter | 35mm |
| Minimum Operating Pressure | 0.2 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 2.3 litres per minute |
| Flow Rate at 0.5 Bar | 6.5 litres per minute |
| Flow Rate at 1 Bar | 9.4 litres per minute |
| Flow Rate at 2 Bar | 13.3 litres per minute |
| Flow Rate at 3 Bar | 16.5 litres per minute |
| Inlet Connection | 1/2-inch M10 |
| Flexible Tails Included | Yes |
| Waste Included | Yes |
| Valve / Cartridge Type | 35mm single-lever cartridge |
| Cartridge Spare Code | T8702–08 |
| WRAS Approved | Yes |
| TMV Approved | No |
The Scudo Belini matt black mini mono basin mixer balances strong contrast with softer shaping: its compact square body and base give the tap definition, while the curved fixed spout and gently arched lever prevent the design from feeling severe. At 128mm high with an 82mm reach, it brings character to a carefully matched smaller basin without dominating the ledge, and the WRAS-approved specification, included flexible tails and supplied waste make the main ordering requirements refreshingly straightforward.
Use the tap’s compact dimensions, fixed outlet and pressure performance to judge whether it suits the planned wash area.
The mini proportions give a smaller wash area a strong matt black accent without introducing the height of a tall basin mixer.
Its block-shaped body and base are softened by the curved spout and lever, helping it coordinate with both angular and rounded fittings.
Operation starts at 0.2 bar, where the confirmed flow rate is 2.3 litres per minute, with stronger delivery as pressure rises.
The 82mm reach and 69.5mm base-to-spout height must suit the bowl position and rim before the tap is selected.
This manual mono mixer is not TMV approved and does not provide thermostatic temperature control.
The curved outlet is fixed rather than swivelling, so its alignment over the bowl cannot be adjusted after installation.
The main tap body has a compact 45 x 45mm square form, sitting on a broader 54 x 54mm base plate that gives the fitting a crisp footprint on the basin. Above it, the fixed spout falls forwards in a smooth curve and the single lever follows a similarly softened line. This mix gives the matt black tap a structured appearance without making every edge rigid or sharply angular.
The basin needs one 35mm tap hole and enough flat ledge space for the 54 x 54mm base plate. The spout reaches 82mm from the tap centre line, while the outlet sits 69.5mm above the base, so both figures should be compared with the bowl position and rim height. Correct matching helps the fixed outlet direct water comfortably into the bowl rather than too close to its rear edge.
The tap operates between 0.2 and 5 bar, but its delivery changes noticeably across that range. It produces 2.3 litres per minute at 0.2 bar, rising to 9.4 litres at 1 bar and 16.5 litres at 3 bar. Check the property’s pressure before ordering so the expected flow suits the basin and household preference. The mixer is manually controlled and not TMV approved, so temperature is adjusted directly with the lever.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
