-47%

Scudo Core Brushed Bronze Round Bath Filler Tap

The Scudo Core bath filler brings warm brushed bronze to bathing.

One central outlet: Blends hot and cold water before filling.

Easy lever control: Quarter-turn handles operate each supply.

Fixed bridge fitting: Installs through two holes at 180mm centres.

Flexible tails supplied: Included for compatible 3/4 inch connections.

Availability: 20 in stock

Original price was: £326.00.
Current price is: £173.99.Save £152.01 off RRP

Description

Scudo Core Brushed Bronze Round Bath Filler Tap Specifications

Product type Round bath filler tap
Brand Scudo
Collection Core
Installation type Deck mounted
Colour and finish Brushed Bronze
Construction material Brass
Mixer type Manual mixer
Handle type Twin levers
Valve and cartridge type Quarter-turn cartridges
Spout movement Fixed, non-swivelling
Overall height 130.5mm
Spout projection 119.96mm
Height to outlet 42.58mm
Tap centres 180mm
Base diameter 50mm
Number of tap holes required 2
Tap-hole diameter 32mm
Inlet connection 3/4 inch BSP
Flexible tails included Yes
Bath waste included No
Minimum operating pressure 0.5 bar
Maximum operating pressure 5 bar
Published flow rates 4, 7, 9.8, 13.6 and 16.7 litres per minute at 0.2, 0.5, 1, 2 and 3 bar
Tails the bathroom retail mascot

Tails’ Take: A Warm Finish for an Uncomplicated Bath Tap

The Scudo Core brushed bronze bath filler gives a warmer finish to a simple two-handle design. Its curved spout sits centrally between the evenly spaced lever controls, while textured rings around the handles provide a subtle point of detail. The brushed surface avoids a glossy look and works naturally with warm stone, timber and bronze accessories, making the tap decorative enough to stand out without feeling ornate.

Would the Brushed Bronze Core Suit Your Bathroom?

Consider the surrounding finishes, available water pressure and required bathing functions before ordering.

✓
A Good Match For

Warm Stone and Timber-Led Bathrooms

Brushed bronze complements beige tiles, natural wood, cream ceramics and other warm neutral surfaces.

Baths with a Prepared Two-Hole Deck

The filler suits a stable mounting area where the two tap positions are correctly spaced and easily accessible underneath.

Users Who Prefer Independent Controls

Separate levers allow the hot and cold supplies to be adjusted individually before reaching the chosen bath temperature.

×
Consider Another Option When

Another Bronze Finish Must Match Exactly

Bronze shades vary between brands, so products from separate collections may differ in warmth, depth or surface texture.

Available Pressure Is Below the Rated Minimum

The specified operating range begins at 0.5 bar, making weaker supplies unsuitable for the intended performance.

A Shower Handset Is Part of the Plan

This model fills the bath through its fixed spout and does not provide a separate handheld outlet.

Control Positioning, Tiled Decks and Bath-Waste Selection

Which side should the hot and cold controls be fitted?

Hot water is normally positioned on the left and cold on the right when the mixer is viewed from the front. The installer should follow the tap markings, supplied instructions and existing pipe arrangement rather than assuming the connections are already correct.

Can the filler be installed through a tiled bath deck?

It may be possible where the tiled surface is flat, properly supported and provides access to the plumbing underneath. The mounting holes must be prepared without damaging the tile or waterproofing. A qualified installer should assess the deck construction before drilling.

What bath waste should be ordered with the tap?

A bath waste is not included. Choose one that suits the bath’s overflow arrangement, outlet size and connected trap. If the visible waste needs to coordinate with the tap, selecting a brushed bronze option from the same manufacturer or collection usually gives the closest finish match.

Additional information

EAN Barcode 5060991206923
Brand Scudo Bathrooms

You may also like…