Matt black brings stronger contrast to both bath filling and rinsing.
Handset outlet included: The 1/2-inch connection supports flexible bath-side rinsing.
Quarter-turn lever control: Provides concise adjustment of hot and cold water.
Useful minimum-pressure flow: Delivers 16.1 litres per minute at 0.5 bar.
Two-hole bath fit: Requires 32mm openings; waste and tails are separate.
Original price was: £250.00.
Our Price: £99.99Current price is: £99.99.Save £150.01 off RRP
| Product Type | Bath shower mixer tap kit |
|---|---|
| Brand | Scudo |
| Collection | Belini |
| Finish | Matt black |
| Mixer Type | Manual mixer |
| Handle Type | Lever |
| Valve Type | Quarter-turn cartridge |
| Replacement Cartridge Code | T8308–08 |
| Tap Holes Required | 2 |
| Tap Hole Diameter | 32mm |
| Inlet Connection | 3/4 BSP |
| Handset Outlet Connection | 1/2 BSP |
| Swivel Spout | No |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 9.5 litres per minute |
| Flow Rate at 0.5 Bar | 16.1 litres per minute |
| Flow Rate at 1 Bar | 21.9 litres per minute |
| Flow Rate at 2 Bar | 30.2 litres per minute |
| Flow Rate at 3 Bar | 36 litres per minute |
| WRAS Approved | No |
| TMV Approved | No |
| Flexible Tails Included | No |
| Waste Included | No |
The Belini gives the bath a strong matt black focal point, with a clean lever-operated design that can coordinate with darker mirrors, overflow covers, flush plates and bathroom accessories. Its fixed spout keeps the silhouette controlled, while the manual mixer lets the user set the water blend directly. Performance rises noticeably with pressure, delivering 16.1 litres per minute at the stated 0.5-bar minimum and 36 litres per minute at 3 bar. Quarter-turn cartridges also keep control movement concise rather than requiring repeated rotations. Plan the installation carefully, as the bath needs two 32mm tap holes and neither flexible tails nor a waste is included.
Check the bath-hole arrangement, system pressure and approval requirements before choosing this manual mixer.
The finish can create a consistent darker accent alongside matching accessories, mirrors, overflow covers and flush plates.
The Belini requires two 32mm tap holes, making it suitable where the bath deck has the correct confirmed drilling arrangement.
The quoted output increases from 16.1 litres per minute at 0.5 bar to 36 litres per minute at 3 bar.
The operating range is 0.5 to 5 bar, so systems below or above those limits require a different confirmed solution.
This mixer is not WRAS approved or TMV approved and should not be selected where either approval is mandatory.
The spout is fixed and the mixer requires two tap holes, so it will not meet either of those installation preferences.
The water temperature and flow are set manually using the lever controls rather than regulated by a thermostatic mixing valve. Quarter-turn cartridges use a relatively short control movement instead of requiring several complete rotations. This mixer is not TMV approved, so it should not be described as providing thermostatic temperature control or confirmed anti-scald protection.
The stated operating range is 0.5 to 5 bar. At the minimum operating pressure of 0.5 bar, the quoted flow is 16.1 litres per minute, increasing to 21.9 litres at 1 bar, 30.2 litres at 2 bar and 36 litres at 3 bar. A 9.5-litre figure is also quoted at 0.2 bar, but this sits below the stated minimum operating pressure and should not be used as confirmation of suitability at that pressure.
The bath requires two 32mm tap holes, with 3/4 BSP inlet connections and a 1/2 BSP handset outlet connection. Flexible tails and the bath waste are not included, so these must be allowed for separately where required. The specific handset, hose and bracket contents are not confirmed here, so check the complete package contents before ordering to ensure every part needed for the planned bath-shower arrangement is covered.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
