-50%

Scudo Muro Brushed Bronze Bath Filler

A bath filler that turns an everyday fitting into a deliberate focal point.

Warm brushed bronze finish: Brings softer metallic colour to stone, timber and neutral bathroom schemes.

Separate hot and cold controls: Twin quarter-turn handles make manual temperature adjustment straightforward.

Strong flow from 0.5 bar: Delivers 14.5 litres per minute at its minimum operating pressure.

Bold two-hole format: Combines upright tap bodies with a fixed central spout and defined Muro lines.

Availability: In stock

Original price was: £257.00.
Current price is: £127.49.Save £129.51 off RRP

Description

Scudo Muro Brushed Bronze Bath Filler Specifications

Product type Deck-mounted bath filler
Brand Scudo
Collection Muro
Finish Brushed Bronze
Construction material Stainless steel
Installation type Deck mounted
Mixer type Manual bath mixer
Controls Twin hot and cold controls
Valve type Quarter-turn cartridges
Tap holes required 2
Tap-hole diameter 32mm per hole
Spout movement Fixed; does not swivel
Inlet connection 3/4-inch BSP
Minimum operating pressure 0.5 bar
Maximum operating pressure 5 bar
Flow rate at 0.2 bar 8.3 litres per minute; reference figure only, as this is below the stated minimum operating pressure
Flow rate at 0.5 bar 14.5 litres per minute
Flow rate at 1 bar 21 litres per minute
Flow rate at 2 bar 30 litres per minute
Flow rate at 3 bar 36.9 litres per minute
Overall width 225mm
Overall height 141.5mm
Overall depth 154.7mm
Net weight Approximately 1.96kg
Flexible tails included No
Bath waste included No
Shower handset included No
WRAS approved No
TMV approved No
Manufacturer part number BRONZE242
Tails the bathroom retail mascot

Tails’ Take: Warm Colour Meets Muro’s Architectural Shape

Muro does not try to disappear into the bath surround. Two upright bodies, short flat controls and a broad central spout give it a strong, structured appearance from every angle. Brushed Bronze softens those sharp lines with a warmer metallic tone, making the design easier to combine with natural stone, textured tiles and timber-effect furniture. It is a particularly effective choice when the tap is intended to become part of the room’s colour scheme rather than simply a functional fitting.

Where Does the Brushed Bronze Muro Bath Filler Work Best?

Check the bath deck, plumbing connections and available water pressure before choosing this two-hole manual mixer.


A Good Match For

Warm, Layered Bathroom Schemes

Brushed Bronze provides a warmer alternative to chrome and can sit comfortably beside beige stone, cream surfaces, dark timber and earthy wall colours.

Baths With a Suitable Two-Hole Deck

The two separate tap bodies create a balanced appearance when installed on a bath ledge with enough width and depth for the complete fitting.

Systems Delivering at Least 0.5 Bar

The filler produces 14.5 litres per minute at 0.5 bar and provides progressively stronger filling performance as the supply pressure rises.

×
Consider Another Option When

Your Bath Only Accepts One Tap Hole

This filler requires two separate 32mm holes and cannot be fitted as a single-hole bath mixer.

You Want Automatic Temperature Regulation

The Muro is a manual mixer rather than a thermostatic tap, so the hot and cold controls must be balanced by the user.

You Need a Bath Shower Mixer Set

This model fills the bath through its fixed spout and does not include a handset, hose or shower bracket.

Planning the Deck Cut-Outs and Plumbing Connections

How much space should be allowed for the Muro bath filler?

The complete fitting measures approximately 225mm wide, 141.5mm high and 154.7mm deep. The bath ledge should provide enough flat surface for both tap bodies, the central spout and access to the connections beneath.

Does the brushed bronze bath filler include its waste and connecting tails?

No. The bath waste and flexible connecting tails are not supplied, so suitable compatible parts will need to be selected separately for the installation.

Is the 8.3 litre flow figure suitable for a 0.2 bar system?

No. Although an 8.3 litre-per-minute test figure is shown at 0.2 bar, the stated minimum operating pressure for this bath filler is 0.5 bar. The plumbing supply should therefore provide at least 0.5 bar at the tap.

Additional information

Brand Scudo Bathrooms

You may also like…