Square chrome controls give a two-hole bath deck a balanced modern centre.
Separate lever controls: Allow direct adjustment of hot and cold supplies.
Quarter-turn operation: Ceramic-disc cartridges keep handle movement short and smooth.
Strong bath-filling flow: Delivers 10.5 litres per minute at 0.5 bar.
Fixed deck-mounted spout: Bath waste is not included with the filler.
Original price was: £181.00.
Our Price: £83.99Current price is: £83.99.Save £97.01 off RRP
| Product Type | Bath filler tap |
|---|---|
| Brand | Scudo |
| Collection | Forme |
| Style | Modern |
| Shape | Square |
| Finish | Polished chrome |
| Material | Brass |
| Overall Height | 111mm |
| Mounting | Deck mounted |
| Tap Holes Required | 2 |
| Number of Handles | 2 |
| Handle Type | Lever |
| Valve Operation | Quarter-turn cartridge |
| Ceramic Disc Technology | Yes |
| Swivel Spout | No |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5.0 bar |
| Flow Rate at 0.2 Bar | 6.5 l/min |
| Flow Rate at 0.5 Bar | 10.5 l/min |
| Flow Rate at 1 Bar | 15.1 l/min |
| Flow Rate at 2 Bar | 17.6 l/min |
| Flow Rate at 3 Bar | 20.5 l/min |
| Inlet Connection Size | 3/4 BSP |
| WRAS Approved | No |
| Waste Included | No |
| Guarantee | 10 years |
The Scudo Forme Polished Chrome Square Bath Filler Tap gives the bath a sharper, more architectural finish than rounded brassware, making it well suited to schemes using straight-edged sanitaryware, tiles and accessories. Two separate levers provide clear control over the water blend, while quarter-turn cartridges with ceramic disc technology keep each movement short and direct. The polished chrome finish brings brightness to the more structured design and coordinates easily with matching bath wastes, shower controls and accessories. Its fixed spout creates an orderly deck-mounted arrangement, provided the bath has suitable space for the required two-hole installation.
Check the mounting surface, water pressure and project approval requirements before choosing this two-hole filler.
The square styling can create a consistent link with straight-edged baths, basins, shower controls and accessories.
Two quarter-turn levers allow the incoming supplies to be adjusted independently when setting the bath temperature and flow.
The reflective finish can coordinate with chrome wastes, shower fittings and accessories without introducing another metal tone.
The deck must accommodate the tap arrangement and leave enough access underneath for the 3/4 BSP inlet connections.
This Forme bath filler is not WRAS approved and will not meet specifications that expressly require that approval.
The spout is fixed and the product does not include a shower handset, so it is intended solely for filling the bath.
The two-lever arrangement gives each incoming water supply its own control, allowing the bath-water blend to be adjusted in small steps. Quarter-turn operation means the handles move through a short range rather than requiring repeated rotations. It also reinforces the balanced, symmetrical appearance associated with a traditional two-control bath filler while retaining the Forme collection’s modern square styling.
The spout does not swivel, so its installed position determines where the water enters the bath. The mounting points should place it comfortably over the bathing area without directing the flow too close to an edge. No confirmed spout reach or tap-centre measurement is available here, so the installer should verify the physical tap layout before making permanent holes in the bath or surrounding deck.
No. Although a test flow of 6.5l/min is listed at 0.2 bar, the confirmed operating range begins at 0.5 bar. At that minimum pressure, the recorded flow is 10.5l/min, increasing to 15.1l/min at 1.0 bar and 20.5l/min at 3.0 bar. Base the buying decision on the stated operating range and have the available dynamic pressure checked where performance is uncertain.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
