Wall-mounted brushed brass leaves the bath rim clear and visually uncluttered.
Single rectangular plate: Combines the fixed spout and broad lever control.
No bath tap holes: The complete mixer mounts through the wall.
Strong stated flow: Delivers 12.8 litres per minute at 1 bar.
Installation parts separate: Flexible tails and bath waste are not included.
Original price was: £212.00.
Our Price: £102.99Current price is: £102.99.Save £109.01 off RRP
| Product Type | Wall-mounted mono bath mixer |
|---|---|
| Brand | Scudo |
| Collection | Muro |
| Installation Type | Wall mounted |
| Construction Material | Brass |
| Finish | Brushed brass |
| Handle Type | Lever |
| Control Type | Single-lever manual mixer |
| Valve / Cartridge | 35mm cartridge |
| Spout Movement | Fixed |
| Tap Holes Required | 0 |
| Inlet Connection | 1/2″ BSP |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 4.3 litres per minute |
| Flow Rate at 0.5 Bar | 9.1 litres per minute |
| Flow Rate at 1 Bar | 12.8 litres per minute |
| Flow Rate at 2 Bar | 18 litres per minute |
| Flow Rate at 3 Bar | 22 litres per minute |
| WRAS Approved | No |
| TMV Approved | No |
| Flexible Tails Included | No |
| Waste Included | No |
The Scudo Muro Brushed Brass Wall-Mounted Plate Bath Tap combines the warmth of brushed brass with a distinctly structured shape. Its elongated flat spout reaches out from the rectangular backplate, while the broad block lever gives the opposite side enough visual weight to balance the design. The softened end of the spout keeps those angular lines from looking too rigid. Brushed brass brings a warmer, more decorative tone than chrome or black, pairing particularly well with deep green, navy, stone-effect and softly neutral bathroom schemes. With the controls and outlet positioned on the wall, the bath rim remains visually clear, allowing the brassware to read as one deliberate feature rather than a collection of separate deck-mounted components.
Consider the wall position, water pressure and surrounding finishes to make sure this distinctive mixer works with the intended bath layout.
The brushed brass finish introduces a softer metallic tone that can complement warm stone, timber effects, painted furniture and richer wall colours.
Wall mounting removes the need for tap holes through the bath rim, creating a cleaner edge around the bathing area.
The substantial lever combines flow and temperature adjustment in one place, with no separate hot and cold handles to coordinate.
This model is designed for wall installation rather than mounting through the bath deck, so the supply arrangement and final wall position must suit that format.
Neither WRAS nor TMV approval is confirmed, and the manual mixer does not provide thermostatic temperature regulation.
The specified operating range begins at 0.5 bar, so lower-pressure supplies fall outside the stated requirements for this tap.
The design uses a wide rectangular wall plate with a long, flat fixed spout on one side and a substantial block-shaped lever on the other. This offset arrangement creates a more architectural look than a conventional central bath mixer. The brushed brass finish softens the geometry with a warmer metallic tone, making it useful where the bath area needs a defined feature without relying on ornate detailing.
The stated operating range is 0.5 to 5 bar. At the minimum stated pressure of 0.5 bar, the listed flow rate is 9.1 litres per minute, rising to 12.8 litres per minute at 1 bar and 22 litres per minute at 3 bar. The separate 0.2-bar test figure does not reduce the specified minimum operating pressure, so suitability should be checked against the pressure available while water is flowing.
Clean the plate, lever and spout with a soft cloth, warm water and a mild non-abrasive cleaner, then dry the finish gently. Avoid abrasive sponges, scouring powders and harsh chemicals that could mark the brushed surface. Regular drying is particularly useful around the spout outlet and lever edges, where water droplets and residue are more likely to remain after the bath has been filled.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
