-47%

Scudo Core Gunmetal Round Bath Filler Tap

The Scudo Core bath filler adds dark gunmetal to modern baths.

Central bath spout: Blends both supplies into one steady outlet.

Twin quarter-turn levers: Control hot and cold water separately.

180mm tap centres: Creates a balanced two-pillar installation.

Flexible tails included: Supplied ready for compatible deck-mounted plumbing.

Availability: 20 in stock

Original price was: £326.00.
Current price is: £173.99.Save £152.01 off RRP

Description

Scudo Core Gunmetal Round Bath Filler Tap Specifications

Product type Round bath filler tap
Brand Scudo
Collection Core
Installation type Deck mounted
Colour and finish Gunmetal
Construction material Brass
Mixer type Manual mixer
Handle type Twin levers
Valve and cartridge type Quarter-turn cartridges
Spout movement Fixed, non-swivelling
Overall height 130.5mm
Spout projection 119.96mm
Height to outlet 42.58mm
Tap centres 180mm
Base diameter 50mm
Number of tap holes required 2
Tap-hole diameter 32mm
Inlet connection 3/4 inch BSP
Flexible tails included Yes
Bath waste included No
Minimum operating pressure 0.5 bar
Maximum operating pressure 5 bar
Published flow rates 4, 7, 9.8, 13.6 and 16.7 litres per minute at 0.2, 0.5, 1, 2 and 3 bar
Tails the bathroom retail mascot

Tails’ Take: A Darker Finish That Still Feels Approachable

The Scudo Core gunmetal bath filler has a stronger presence than a typical silver tap, but its rounded body keeps the darker finish from feeling harsh. The central spout curves gently into the bath, while the slim lever handles and textured control bands add a smart, tactile detail. Gunmetal works particularly well on this connected bridge design because it gives the complete tap a smooth, continuous appearance without relying on a glossy shine.

Would the Gunmetal Core Work on Your Bath?

Consider the bath construction, required functions and preferred temperature control before choosing this filler.


A Good Match For

Bathrooms with Darker Brassware

The finish can coordinate the bath with gunmetal showers, wastes, accessories and furniture handles elsewhere in the room.

Baths Designed for a Two-Hole Mixer

The fixed bridge creates a tidy installation where the bath already provides suitable mounting positions.

Simple Lever-Based Operation

Separate hot and cold controls make it easy to adjust each supply before blending the water through the spout.

×
Consider Another Option When

Handheld Rinsing Is Needed

This filler has no shower handset, so choose the Core bath shower mixer for hair rinsing and directed cleaning.

The Bath Rim Is Narrow or Flexible

Both tap bodies need a flat and adequately supported surface to remain secure during regular use.

Thermostatic Control Is a Priority

This manual mixer does not automatically maintain a chosen temperature when either water supply changes.

Acrylic Bath Fitting, Unequal Pressures and Fixed-Spout Use

Can the Core filler be installed on an acrylic bath?

It may be installed where the bath provides a suitable flat mounting area and the manufacturer permits deck-mounted taps. The underside may require reinforcement to prevent movement when the levers are operated. Confirm the hole positions and support requirements before drilling.

What happens if the hot and cold pressures are different?

A large pressure difference can make the mixed temperature harder to adjust and may allow the stronger supply to dominate the flow. The plumbing should be checked and balanced where necessary so both sides operate predictably within the stated pressure range.

Can the spout be moved after the tap is installed?

No. The spout is fixed as part of the bridge and remains in the same position over the bath. Confirm that its projection reaches comfortably past the rim before the mounting holes are prepared.

Additional information

EAN Barcode 5060991206930
Brand Scudo Bathrooms

You may also like…