Brushed bronze brings warmer metallic character to a compact wall-mounted bath arrangement.
Thermostatic bath filler: Regulates the mixed-water temperature through two controls.
Bath rim kept clear: Wall mounting removes the need for conventional tap pillars.
Choice of handle texture: Smooth and diamond cross-hatch options are included.
0.5 to 5 bar range: Maximum stated flow reaches 18.7 litres per minute at 5 bar.
Original price was: £334.00.
Our Price: £222.99Current price is: £222.99.Save £111.01 off RRP
| Product Type | Thermostatic bath filler tap |
|---|---|
| Brand | Scudo |
| Collection | Core |
| Installation Type | Wall mounted |
| Construction Materials | Brass and stainless steel |
| Finish | Brushed bronze |
| Valve Type | Thermostatic |
| Number of Handles | 2 |
| Handle Type | Thermostatic control handles |
| Included Handle Styles | Smooth and diamond cross-hatch |
| Spout Movement | Fixed |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Operating Pressure | 5 bar |
| Flow Rate at 0.2 Bar | 3.2 litres per minute |
| Flow Rate at 0.5 Bar | 6.3 litres per minute |
| Flow Rate at 1 Bar | 7.9 litres per minute |
| Flow Rate at 2 Bar | 11.8 litres per minute |
| Flow Rate at 3 Bar | 14.1 litres per minute |
| Flow Rate at 5 Bar | 18.7 litres per minute |
| Inlet Connection | 3/4-inch |
| WRAS Approved | No |
| TMV Approved | No |
The brushed bronze Core filler introduces a warmer metallic note while keeping the controls and outlet together in one wall-mounted arrangement. That leaves the bath rim available for a cleaner finish or for layouts where drilling the bath is undesirable. Thermostatic operation provides regulated mixed-water temperature control, while the two handles keep the operating functions clearly separated. Scudo also supplies smooth and diamond cross-hatch handle options, allowing the visible detailing to be adapted to the wider scheme. The fixed spout makes careful positioning essential, and the available system pressure should be confirmed because flow increases from 6.3 litres per minute at 0.5 bar to 18.7 litres per minute at 5 bar.
Plan the pipework, outlet location and required approvals before the finished wall surface is installed.
The brushed bronze finish adds warmth while retaining a muted surface that can sit comfortably within tonal and natural-material interiors.
Wall mounting avoids placing tap pillars through the bath deck, helping maintain a simpler outline around the bathing area.
Both smooth and diamond cross-hatch handle options are supplied, giving the controls either restrained or more detailed styling.
The wall-mounted format needs suitable first-fix plumbing and a secure installation position behind the finished wall surface.
The outlet is fixed rather than swivelling, so it remains in the same position above the bath after installation.
This model is listed as neither WRAS approved nor TMV approved and should not be selected where either approval is compulsory.
No. Thermostatic describes the type of valve used to regulate the mixed-water temperature, while TMV approval is a separate product approval. This bath filler is specifically listed as not TMV approved. Any project that requires a particular approval standard should therefore be checked with the relevant installer or specification before the product is ordered.
The outlet needs to discharge clearly inside the bath without sitting awkwardly over the rim or too close to the wall. Because no installation dimensions are stated here, the correct fitting instructions or technical template should be used to set the height and projection. Confirm the bath’s final position before fixing the pipework, as the spout cannot be swivelled after installation.
The 3/4-inch inlet connections and thermostatic components sit within the wall-mounted installation, so future maintenance should be considered before boxing or tiling is completed. Where the room construction permits, plan a sensible route to the connections from an adjoining space or removable panel. This can reduce disruption if the valve or pipe joints ever need inspection.
| Brand | Scudo Bathrooms |
|---|
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
