Made to sit behind a countertop basin, the Scudo Muro pairs a slim 311mm body with a dark gunmetal finish and a broad fixed spout. It looks sharp and modern without making the worktop feel crowded.
Raised for countertop basins: A 261mm outlet height and 116mm spout projection provide useful clearance over a raised bowl.
Simple single-lever control: One flat handle adjusts the water flow and temperature through the mono mixer’s plastic cartridge.
Performance from 0.5 bar: Produces a published 7.4 litres per minute at 0.5 bar, increasing to 17.5 litres per minute at 3 bar.
Ready for single-hole fitting: Flexible tails are included for installation through a 35mm tap hole; a basin waste is not supplied.
Original price was: £256.00.
Our Price: £139.99Current price is: £139.99.Save £116.01 off RRP
| Product type | High-rise mono basin mixer tap |
|---|---|
| Brand | Scudo |
| Collection | Muro |
| Installation type | Deck-mounted, single-hole installation |
| Colour and finish | Gunmetal |
| Construction material | Stainless steel |
| Tap control | Single lever |
| Spout type | Fixed, non-swivelling |
| Overall height | 311mm |
| Height to outlet | 261mm |
| Spout projection | 116mm |
| Overall tap depth | 165mm |
| Base width | 50mm |
| Number of tap holes required | 1 |
| Tap-hole diameter | 35mm |
| Inlet connection | 1/2 inch M10 |
| Flexible tails included | Yes |
| Basin waste included | No |
| Valve and cartridge type | Plastic cartridge |
| Minimum operating pressure | 0.5 bar |
| Maximum operating pressure | 5 bar |
| Published flow rates | 3.6, 7.4, 10, 14.2 and 17.5 litres per minute at 0.2, 0.5, 1, 2 and 3 bar |
| WRAS approved | No |
| TMV approved | No |
Tall taps can easily look oversized next to a compact countertop basin, but the Muro keeps its width under control. Its narrow upright body, flat lever and 50mm base leave a tidy footprint, while the broad 116mm spout gives the top enough visual weight to feel balanced. Gunmetal works particularly well on this shape because the light catches its flat surfaces and reveals more detail than a plain black finish. The important check is positioning: make sure the outlet reaches comfortably over the bowl before the tap hole is cut.
Measure the basin and worktop carefully, then check the available pressure and installation requirements.
The outlet sits 261mm above the mounting surface, allowing the tap to stand behind or beside a raised vessel basin rather than being hidden below its rim.
The slim upright body, flat lever and wide spout suit simple basins, straight-edged furniture and uncluttered worktops.
Gunmetal adds depth beside pale stone, white ceramics and charcoal surfaces without creating the stark contrast associated with solid black.
The spout projects 116mm, so a wide gap behind the basin or an unusually thick rim could leave the water landing too close to the edge.
Allow for the full 311mm height, particularly where the basin sits beneath a mirror cabinet, shelf or sloping ceiling.
This model is not WRAS approved, so check the requirements of the installation before choosing it for a regulated or specification-led project.
Position it so the 116mm spout reaches comfortably over the rim and directs water towards the usable area of the bowl. Avoid placing the outlet too close to an edge, where splashing is more likely. Check the basin dimensions and intended tap-hole position together before drilling the worktop.
The specified operating range begins at 0.5 bar, where the published flow rate is 7.4 litres per minute. This increases to 10 litres per minute at 1 bar and 14.2 litres per minute at 2 bar. Although a figure is published at 0.2 bar, installations should be assessed against the stated 0.5 bar minimum.
Flexible tails are included, and the tap uses a 1/2 inch M10 inlet connection. A basin waste is not supplied, so this needs to be selected separately. Installation also requires one 35mm tap hole, and the fixed spout cannot be turned to compensate for an unsuitable position.
| EAN Barcode | 5060991207494 |
|---|---|
| Brand | Scudo Bathrooms |
Affordable bathroom products, clear information and support before you order.
Choosing bathroom products online should not feel like guesswork. Tails helps keep the focus on the things customers usually want to know before ordering, such as size, fit, finish, suitability, delivery and whether a product is right for the room it is going into.
We focus on competitively priced bathroom products for everyday homes, including toilets, basins, baths, taps, showers, furniture, mirrors and accessories without making the buying process feel complicated.
Product photos are only part of the story. We include honest pros and cons alongside clear details such as dimensions, finishes, fitting notes and anything worth checking before ordering or installation.
From compact cloakrooms to busy family bathrooms, different spaces need different products. Our range is built around practical choices that suit a wide variety of layouts, styles and budgets.
If something is unclear, you do not have to guess. Whether you want to check stock, delivery, sizing, compatibility or product suitability, you can contact us before placing your order.
Have a question about stock, delivery estimates, product dimensions, fittings, compatibility, finishes or whether an item is suitable for your bathroom layout? Check our delivery information or ask us before you order.
