Filter

TAILS’ SHOWER TRAY STARTING POINT

Build your shower around the right base

Shower trays provide the shaped, watertight base beneath a compatible shower enclosure or screen. Explore different sizes, footprints, heights and surface finishes, then compare the exact dimensions, waste position and installation requirements to find a tray that fits your shower area correctly.

Which Shower Tray Is Right for Your Space?

Start with the available footprint, then confirm tray height, waste position and enclosure compatibility

Shop This Shower Tray Collection If

You are comparing tray footprints

This collection brings together shower trays in different shapes and proportions, helping you compare how each footprint uses the available floor area. Measure the finished installation space carefully and allow for walls, tiles and any adjoining bathroom fittings.

You need a particular showering area

Tray dimensions affect both the external footprint and the usable space inside the shower. Compare the full length and width rather than choosing from one measurement alone, especially where comfortable standing and movement are priorities.

You are planning the complete tray installation

Shower trays can differ in overall height, waste location and whether they are intended for low-level or raised fitting. Checking these details early helps you choose a tray that works with the available drainage route and preferred finished step-in height.

A Shower Tray May Not Suit Your Installation If

The exact finished dimensions are unknown

Nominal tray sizes should not be used without checking the precise product measurements and completed wall surfaces. A tray that is too large cannot be forced into a restricted opening, while an undersized base can leave unwanted gaps around the installation.

The waste cannot connect in the stated position

The tray outlet must align with a workable drainage route beneath or beside the shower area. A different tray or installation height may be required where joists, existing pipework or limited floor depth prevent the selected waste position from being connected correctly.

Its profile does not match the enclosure

The tray and enclosure must correspond in size, shape and curved or straight edge arrangement. A similar headline measurement is not enough when the glass, door or frame is designed around a different footprint or radius.

Shower Tray FAQs

Tray sizing, installation height and waste compatibility explained

  • What should I check before buying a shower tray?

    Confirm the finished length and width, tray shape, overall height, waste position and installation method. You should also check that the intended enclosure or wetroom panel arrangement is compatible with the tray’s exact footprint.

  • Are shower tray sizes exact?

    The listed size may be nominal, and the precise external dimensions can vary slightly between products. Use the individual technical drawing when the tray must fit tightly between walls or align with an existing enclosure.

  • Can a shower tray be installed at floor level?

    Some trays support a low-level installation when the floor construction and drainage route allow it. Others may need to be raised to create space for the waste and pipework, so check the product requirements before deciding the finished height.

  • Is the shower waste included with the tray?

    Not always. Some trays include a compatible waste, while others require one to be purchased separately. Check the required waste diameter, flow capacity and fitting arrangement rather than assuming any shower waste will suit the tray.

DESIGNER’S NOTE

Choose a tray footprint that follows the room rather than fighting it, leaving comfortable clearance around nearby fittings and keeping the shower base visually proportionate to the available floor area.