-38%

Scudo Oak Mussel 800mm x 340mm Traditional Base End Panel

Oak mussel softens the exposed end of a traditional furniture run.

Made for Shaker furniture: Coordinates with compatible traditional fitted base units.

Standard-depth compatibility: Finishes visible cabinet sides around 340mm deep.

800 x 340mm panel: Creates full-height coverage with an 18mm profile.

May require trimming: Allows accurate alignment during professional installation.

Availability: 20 in stock

Original price was: £95.00.
Current price is: £58.49.Save £36.51 off RRP

Description

Specifications for the Scudo Oak Mussel 800mm x 340mm Base End Panel

Product Type Base end panel
Brand Scudo
Furniture Range Fitted furniture
Style Traditional
Panel Design Flat
Finish Oak mussel
Height 800mm
Width 340mm
Thickness 18mm
Intended Position Exposed side of a base unit
Compatible Furniture Depth Standard depth
Compatible Units Scudo standard-depth base-unit carcasses
Cutting Required May be required
Base Unit Included No
Tails the bathroom retail mascot

Tails’ Take on a Softer Furniture Finish for Exposed Cabinet Ends

The Scudo Oak Mussel traditional base end panel brings the exposed side of a standard-depth cabinet into the finished furniture scheme, replacing a visible carcass edge with a coordinated 800 x 340mm surface. Its flat face provides a quieter contrast to framed Shaker doors and drawers, while the Oak Mussel finish adds depth without feeling as dark as stronger painted colours; your fitter can trim the panel where the final installation requires a more exact fit.

Planning the Final Edge of an Oak Mussel Furniture Run

Use the panel on a visible cabinet side and allow for its thickness, final height and any on-site trimming.

✓
Who Should Buy

Cabinet Runs Ending in Open View

The panel gives the outer side of the final base unit a finished face rather than leaving the carcass visible.

Traditional Furniture Needing a Calmer End Detail

Its plain surface colour-matches the Shaker furniture without repeating the framed design on the cabinet side.

Projects Allowing Final Adjustment on Site

A fitter can cut the panel down where the completed cabinet, plinth or worktop arrangement requires it.

×
Who Shouldn’t Buy

Customers Ordering a Complete Furniture Unit

This is the decorative side panel only and does not include a carcass, doors, drawer fronts, plinth or worktop.

Layouts Using Slim-Depth Bathroom Furniture

The 340mm width is intended for standard-depth base units rather than shallower furniture formats.

Installations with No Allowance for Added Width

The panel adds 18mm to the end of the furniture run and must fit beside nearby walls, sanitaryware or doors.

Fitting Advice for the Oak Mussel End Panel

Why is this traditional end panel flat rather than Shaker framed?

The panel is designed to colour-match the traditional Shaker furniture while keeping the side of the cabinet visually simple. Doors and drawer fronts carry the framed detailing, whereas the exposed end uses a plain surface to complete the run without adding another recessed panel. This gives the furniture a balanced finish when viewed from the side.

When would a fitter need to cut the 800 x 340mm panel?

Trimming may be needed where the installed cabinet height, plinth position, worktop or surrounding room features differ from the full supplied size. Your fitter should measure the completed furniture arrangement before making any cuts and check which edges will remain visible. This helps the panel align neatly with the base unit rather than relying only on nominal cabinet measurements.

Does the panel change the overall width of the fitted furniture?

Yes. The end panel sits against the exposed outer side of the cabinet and adds its 18mm thickness to the finished run. Include that amount when checking the remaining gap beside walls, toilet pans, baths or opening doors. This is particularly important in layouts where the furniture has been planned closely between fixed bathroom fittings.

Additional information

Brand Scudo Bathrooms