-52%

Scudo Designer Round Matt Black Angled TRV Valves Pair

Matt black makes the radiator connections part of the room’s design.

Round thermostatic head: Provides convenient adjustment at the radiator.

Compact angled bodies: Connect compatible pipework at a right angle.

Pair supplied together: Creates a consistent finish on both sides.

Standard connection sizes: Suits 15mm pipes and 1/2-inch BSP radiators.

Availability: 20 in stock

Original price was: £81.00.
Current price is: £38.99.Save £42.01 off RRP

Description

Scudo Black Angled TRV Valves Specifications

Brand Scudo
Product Type Thermostatic radiator valves
Quantity Pair
Valve Configuration Angled
Head Shape Round
Finish Matt black
Thermostatic Yes
Radiator Connection 1/2-inch BSP
Pipe Connection 15mm
Tails the bathroom retail mascot

Tails’ Take: Sculpted Black Controls with a Bold Architectural Edge

The Scudo designer round matt black angled TRV valves transform exposed radiator connections into a deliberate part of the bathroom scheme, pairing smooth cylindrical control heads with compact angled bodies and a deep, light-absorbing finish. Their dark silhouette looks especially striking beneath black towel rails or against pale walls, creating crisp definition without appearing oversized. Thermostatic adjustment adds practical room-level heat control, while the coordinated pair gives both sides of the radiator a consistent, professionally finished appearance.

Choosing Matt Black Valves for the Correct Pipe Route

Confirm the angled layout, radiator tapping and 15mm pipe diameter before installation.


Who Should Buy

Black Radiators Needing Coordinated Connections

The matt black finish creates a unified appearance beneath matching radiators and heated towel rails.

Pipework Requiring a Right-Angle Turn

The angled bodies suit layouts where the heating pipe and radiator inlet face different directions.

Rooms Needing Individual Heat Adjustment

The thermostatic head allows the connected radiator’s output to be adjusted locally.

×
Who Shouldn’t Buy

Installations Requiring Straight Valves

The angled format changes the connection direction and will not suit every radiator layout.

Heating Systems Using Another Pipe Size

These valves are designed for 15mm pipework rather than alternative pipe diameters.

Radiators Without 1/2-Inch BSP Tappings

The radiator inlet must accept the specified 1/2-inch BSP connection.

Planning the Scudo Matt Black Angled TRV Installation

When is an angled radiator valve the correct choice?

An angled valve is used where the radiator inlet and incoming heating pipe meet at a right angle. This is common when pipework rises from the floor beneath a side-entry radiator or approaches horizontally from the wall. The exact route should be checked before purchase, as an angled valve cannot automatically replace a straight or corner configuration.

What do the two connection measurements refer to?

The 1/2-inch BSP measurement applies to the radiator-side connection, while 15mm refers to the heating pipe connection. Both sides must correspond with the installation. A suitable radiator thread alone does not confirm compatibility where the pipework uses a different diameter.

How does the thermostatic head control the radiator?

The round thermostatic head adjusts the heat output of the individual connected radiator. It works alongside the boiler programmer and main thermostat rather than replacing them, allowing the room to use a different radiator setting from other areas of the property.

Additional information

Brand Scudo Bathrooms

You may also like…