-52%

Scudo Designer Round Anthracite Angled TRV Valves Pair

Anthracite blends exposed valves into darker radiators and towel rails.

Individual heat adjustment: Thermostatic control manages warmth at the radiator.

Angled installation format: Matches compatible right-angle pipe arrangements.

Coordinated valve pair: Completes both radiator connections in one finish.

Common connection sizing: Uses 15mm pipe and 1/2-inch BSP fittings.

Availability: 20 in stock

Original price was: £81.00.
Current price is: £38.99.Save £42.01 off RRP

Description

Scudo Anthracite Angled TRV Valves Specifications

Brand Scudo
Product Type Thermostatic radiator valves
Pack Quantity Pair
Valve Layout Angled
Control-Head Design Round
Colour / Finish Anthracite
Temperature Control Thermostatic
Radiator-Side Connection 1/2-inch BSP
Heating-Pipe Connection 15mm
Tails the bathroom retail mascot

Tails’ Take: Quietly Refined Valves That Disappear into White Heating

The Scudo designer round head anthracite grey angled TRV valves bring a soft, polished finishing touch to radiators and heated towel rails, using smooth circular controls and a crisp coating that blends effortlessly with dark heating products. The angled format creates a practical transition between the radiator and 15mm pipework, while thermostatic adjustment adds convenient control over the warmth of the individual room.

Selecting Valves for the Radiator and Pipe Position

Check that the angled route, radiator tapping and heating-pipe diameter all correspond with the planned installation.

Who Should Buy

Dark Towel Rails Needing a Subtle Connection

The dark finish helps the valves sit discreetly beneath matching white radiators rather than interrupting the design with contrasting metalwork.

Heating Pipes Approaching at a Right Angle

The angled valve bodies suit installations where the pipe route needs to turn between the floor or wall and the radiator inlet.

Rooms Requiring Separate Temperature Settings

The thermostatic control head allows the heat output of the connected radiator to be adjusted independently.

× Who Shouldn’t Buy

Pipe Routes Needing Straight-Through Valves

The angled body changes the connection direction and will not suit every radiator and pipework arrangement.

Installations Using Non-Standard Pipe Diameters

The heating-side fitting is intended for 15mm pipework, so another diameter will require a different compatible solution.

Radiators with Different Inlet Threads

The radiator must accept a 1/2-inch BSP connection for the valve pair to be suitable.

FAQs about this question

Why would an angled valve be selected instead of a straight model?

An angled valve turns the connection between the radiator inlet and the heating pipe, making it suitable where those two points face in different directions. This is common when pipework rises from the floor beneath a side-entry radiator or approaches from the wall. The correct configuration depends on the actual installation, so the existing or planned pipe route should be checked before purchase.

What is the difference between the 1/2-inch and 15mm connections?

The 1/2-inch BSP fitting connects the valve to the radiator, while the 15mm fitting connects it to the heating pipe. These measurements apply to separate sides of the valve and must both be compatible. Matching only the radiator thread does not confirm suitability if the household pipework uses another diameter.

Does the thermostatic head control the entire heating system?

No. The thermostatic head manages the output of the individual connected radiator rather than controlling the boiler or every radiator in the property. It allows the room’s heat setting to be adjusted locally, while the central-heating programmer and main thermostat continue to manage the wider system.

Additional information

Brand Scudo Bathrooms